Is your printer broken or faulty? Looking for help to fix printer problems? If the answer is yes, you have landed at the right place. Like any other piece of technological equipments, printers also break down. There are different reasons behind this. It might be a paper jam or leaking ink. How to fix these issues? Go through this article and get the tips.
Printer paper jam is a very common problem. This problem occurs when paper is either loading or being printed upon. The paper gets wrapped around the printer’s paper spools and it gets caught between various moving parts of the printer and stops printing.
How to fix printer paper jam problem? Unplug the printer from its power source, and unload all unjammed paper. Next, gently remove the printhead and open the door to expose the paper spools. Then gently grab the paper by a corner and then pull it, following the angle of the machine. At the time of pulling the paper if the paper gets torn, don’t panic! Just pull it out in the same manner as mentioned. You can use some tweezers to free the printer from a tiny piece of paper.
Are you trying to install a printer? Check the Device Manager in the Control Panel for any Unknown Devices. The printer will be shown as an Unknown Device if you plug the cable in prior to installing the driver software. You need to remove the Unknown Device and then unplug the USB cable and then install the software that has been supplied with the printer. Once the installation is over, put the USB cable back in.
Are you trying to print something and find that the printer is not responding? If yes, then the problem might be with your computer. To fix this issue, free up some virtual memory. Abort your current print jobs and close all programs including your security software and media players. Once all of the programs are closed, again try the print option.
Ink leaking and smearing are some other common printer problems. Sometimes, you may find that the printed documents are coming out with a little bit more ink than they should. This happens due to an issue with the ink cartridge. To resolve the issue, you need to open the printer to the ink bar, and then press the ink cartridge eject button. After accessing the faulty ink cartridges, check the bottom. If you find that the plastic film on the bottom of the cartridge is cloudy, probably the cartridge is blocked, and you need to clean it.
These are some useful tips that you can remember to fix your faulty printer.
Alternative Medicine Treatment For The Crohn’s Disease
IT Support – 10 Tips For Companies
Is Astrology Valid?